GW Instek PSU 60-25 - Remote Control Overview

ANALOG CONTROL
117
Analog Remote Control Overview
The PSU power supply series have a number of analog control
options. The Analog Control connectors are used to control output
voltage and current using external voltage or resistance. The power
supply output can also be controlled using external switches.
There is also an isolated analog control option. The Isolated analog
connector is used to control the output voltage and current using
an isolated external voltage or current source. Like the analog
connector, it can also be used to monitor the current and voltage
output as well. Use GW Instek part number PSU-ISO-V for voltage
control and monitoring, and use PSU-ISO-I for current control and
monitoring.
 Analog control connector overview → from page 118
 External voltage control of voltage output → from page 121
 External voltage control of current output → from page 123
 External resistance control of voltage output → from page 125
 External resistance control of current output → from page 128
 External control of output → from page 130
 External control of the shutdown → from page 133