: Moving object detection
You can activate or deactivate the detect function of the moving object. After the
function is activated, when a moving pedestrian is detected, the image interface will
display an alarm message.
NOTICE
Considering dierent vehicle model congurations, this button is located under the
system setting menu for certain models.
: Vehicle washing station mode
Touch the button to enable or disable the washing station mode. After the washing
station mode is enabled, the tyre's forward track will be displayed, and the line width
indicates the tyre width.
: Fully automatic parking button(▷ Page 120)
【Reverse assist】 button:(▷ Page 122)
: System settings
Touch the setting button to set the setting system. The following items can be set on
the system interface.
〉
Intelligent view switch
You can activate or deactivate the intelligent view switch function. After the func-
tion is activated:
When the vehicle is in gear D, if the front radar detects an obstacle less than or
equal to 1m from the vehicle body, it will automatically switch to the front top im-
age.
When the vehicle is in gear R, if the rear radar detects an obstacle less than or
equal to 1m from the vehicle body, it will automatically switch to the rear top im-
age.
It will automatically switch to the previous image after the obstruction is removed.
〉
Car Model Color
The color of the vehicle model can be changed.
〉
Car Model Transparency
In the 3D view mode, touch the car model transparency settings button to change
the model transparency.
When the vehicle model transparency is selected as 100%, the vehicle bottom
117
2
Driving
To Next Page
Loading...