What to do if h/p/cosmos pluto device cannot be switched on?
If your h/p/cosmos Treadmill won't switch on, try the following: * Release the emergency off. * Check the power supply connection. * Check the device protection switch. * Check the power socket by testing it with another device.
What to do if elevation does not work (E21) on h/p/cosmos Treadmill?
If the elevation isn't working and error code E21 appears on your h/p/cosmos Treadmill, here’s what to do: 1. Switch the device off. 2. Wait for 10 minutes to allow it to cool down. 3. Switch it back on again. If the E21 error persists, unplug the device, prevent reconnection, clearly mark it, and contact h/p/cosmos service personnel via telephone and in writing.
General| Type | Treadmill |
|---|---|
| Running Surface | 150 x 50 cm |
| Incline Range | 0 - 15% |
| Weight Capacity | 180 kg |
| Display | LCD |
| Programs | pre-set programs |
To Next Page
