h/p/cosmos pluto - 16 Appendix 3: Symbols

appendix
file: n:\article\cos14310m5-v1_08hpc-en\20150130_cos14310m5-v1.08hpc-en_instructions_for_use_h-p-cosmos_treadmill.doc
© 2015 h/p/cosmos sports & medical gmbh author: fh email@h-p-cosmos.com created 30.01.2015 printed 30.01.2015 page: 215 of 216
16 Appendix 3: Symbols
All symbols used comply with the respective norms IEC417, IEC878, EN957-1 and Council Directive 2002/96/EC.
c
EC Declaration of Conformity
for sports and fitness running machines
n
EC Declaration of Conformity
for medical running machines
Read manufacturer’s guide, advice,
instructions and manual
ISO 7000-1641
M
Protection ground
IEC 60417-5019
Symbol based on ISO7010:2003-M002.
Follow manufacturer’s guide, advice,
instructions in the manual. Manual
contains relevant safety information.
N
Earth
IEC 60417-5017
Warning / safety precautions
Pay attention to accompanying
instructions / ISO 7010-W001
Non-sterile product
2012
Manufacturing date
P
Potential compensation
IEC 60417-5021
Manufacturer
Chassis ground
R
Applied part of type B
IEC 60417-5840
Risk/danger of entanglement
Q
Applied part of type BF
IEC 60417-5333
Symbol for collection, treatment,
recycling and disposal of waste
electrical and electronic equipment
(WEEE) as set out in directive
2002/96/EC of 27 January 2003 of
the European Parliament and of
the Council on waste electrical and
electronic equipment. Necessary
to reduce the waste management
problems linked to heavy metals
and flame retardants.
J
Dangerous electric voltage
IEC 60417-5036
T
Alternating current (AC)
IEC 60417-5032
3NT
Alternating 3-phase current (AC)
with neutral line
IEC 60417-5032-2
Warning of hot surfaces
N
connection point for Neutral line
IEC 60445
Risk/Danger of stumbling