h/p/cosmos pluto - Page 179

accessories and options
file: n:\article\cos14310m5-v1_08hpc-en\20150130_cos14310m5-v1.08hpc-en_instructions_for_use_h-p-cosmos_treadmill.doc
© 2015 h/p/cosmos sports & medical gmbh author: fh email@h-p-cosmos.com created 30.01.2015 printed 30.01.2015 page: 179 of 216
Adjustment of the bar handrails
Step
Illustration
Action
[01]
Locking lever
Release the locking lever at the handrail
by lifting up the lever
[02]
Push button
Adjust the bar handrail to the desired height
by pressing the push button.
[03]
Move the bars horizontally to adjust the required width.
[04]
Lock the locking lever by pushing it down.
[05]
N At the rear end of the parallel bars, two telescope
tubes are mounted inside the tubes of the
handrails. They can serve the subject when
mounting the running surface with a wheelchair.
N After entering the running surface, the telescope
handrails have to be inserted back to the handrail
tubes to avoid any obstacles and risks of injury for
the therapist moving around the running machine.