h/p/cosmos pluto - Page 57

operation
file: n:\article\cos14310m5-v1_08hpc-en\20150130_cos14310m5-v1.08hpc-en_instructions_for_use_h-p-cosmos_treadmill.doc
© 2015 h/p/cosmos sports & medical gmbh author: fh email@h-p-cosmos.com created 30.01.2015 printed 30.01.2015 page: 57 of 216
Possibilities of interfering within the cardio mode manually
Initiation: Cardio mode is selected. Running belt is moving.
Step no.
Activity
Keys
Response / Display
[01]
Alteration of speed
Alteration of the speed
automatically changes
the allowed max. speed
during cardio mode
a or d
press and hold
= indicates 0 ... max. speed of the machine
(for max. allowed speed during cardio mode)
Examples:
a) Set max. speed 4.0 if you want the subject to walk and
control the load by means of elevation.
b) Set max. speed 20.0 if you want the subject to control the
load by means of speed without elevation.
If speed is being reduced to 0, PAUS is displayed. =.
Current values will be sustained.
[02]
Pause mode -
Interfere with the cardio mode
a
= indicates PAUS, running belt stops. All displays stop.
Current values will be sustained. After restart with d or c all
displayed values will be "added".
[03]
Alteration of elevation
f or e
press and hold
Elevation is being increased / reduced (0-max.)
Important: Alteration of the elevation can have impact on the
heart rate of the subject and therefore can result in
compensation via automatic speed control.
[04]
Changing
the max. level of heart rate
c
and simultaneously
e or f
  is illuminated
% indicates the max.  level of the heart rate /
the min.  level of heart rate is automatically changed within
the selected range.
[05]
Switch to the next or previous
mode
c + d
or
c + a
Switch to the next or previous mode.
This is a perfect way to change the mode without stopping the
belt.