h/p/cosmos pluto - Page 75

operation
file: n:\article\cos14310m5-v1_08hpc-en\20150130_cos14310m5-v1.08hpc-en_instructions_for_use_h-p-cosmos_treadmill.doc
© 2015 h/p/cosmos sports & medical gmbh author: fh email@h-p-cosmos.com created 30.01.2015 printed 30.01.2015 page: 75 of 216
[39]
Confirm speed
c
§ indicates distance: 0 is flashing
[40]
Confirm distance 0 (this step will
be programmed after time)
c
! indicates time (minutes): 0:00 is flashing
[41]
Select time 5 minutes
a or d
[42]
Confirm time
c
! indicates time (seconds): 5:00 is flashing
[43]
Confirm time 00 seconds
c
$ indicates elevation: 0.0 is flashing
[44]
Confirm elevation 0 %
c
" indicates acceleration level: Acc. 1 is flashing
[45]
Select acceleration level
("deceleration") 2.
a or d
In this program step the speed will be reduced from 16 km/h to
6 km/h at an acceleration level 2
[46]
Confirm acceleration level
c
= indicates speed: 0.0 is flashing
% indicates program step: St. 6
[47]
Confirm stop-speed 0 km/h and
save program file
c for more than
5 seconds
End of programming.
The profile can be started later on in test mode Pr. 21