To Next Page

To Previous Page

You can now configure the switch.

NOTE:

When the switch boots for the first time, it automatically obtains the configuration file throu

h the DHCP

server. If it fails to obtain the configuration file, it boots with the default configuration.

Changing the boot mode

By default, the system starts up in fast boot mode. To change the boot mode to normal, press Ctrl + B

within one second to enter the Boot ROM menu:

BOOT MENU

1. Download application file to flash

2. Select application file to boot

3. Display all files in flash

4. Delete file from flash

5. Modify BootRom password

6. Enter BootRom upgrade menu

7. Skip current system configuration

8. Set BootRom password recovery

9. Set switch startup mode

0. Reboot

Enter your choice(0-9):

Enter 9. The system prompts you to change the startup mode:

The current mode is fast startup mode!

Are you sure you want to change it to full startup mode? Yes or No(Y/N)

Enter Y. The system displays the following information:

Setting startup mode...done!