22
************************************************************************
* *
* H3C S3100V2-52TP BOOTROM, Version 105 *
* *
************************************************************************
Copyright (c) 2004-2010 Hangzhou H3C Technologies Co., Ltd.
Creation Date : Jan 13 2011, 16:39:15
CPU Clock Speed : 400MHz
Memory Size : 256MB
Flash Size : 128MB
CPLD Version : 001
PCB Version : Ver.B
Mac Address : 000fe2100000
Press Ctrl-B to enter Extended Boot menu...0
In normal startup mode, the waiting time is five seconds. If you press Ctrl + B within five seconds, the Boot
ROM menu is displayed. If you perform no operation or press a key other than Ctrl + B within five seconds,
the system begins to automatically start up and the following information is displayed:
Starting to get the main application file--flash:/s3100v2-52tp.app!.................
...............................................................................
...............................................................................
....
The main application file is self-decompressing................................
...............................................................................
...............................................................................
...............................................................................
...............................................................................
...............................................................................
...............................................................................
...............................................................................
...............................................................................
...............................................................................
...............................................................................
...............................................................................
...............................................................................
.....................................Done!
System is starting...
Board checking.......................LSJ252TPA
SDRAM fast selftest........................OK!
Flash fast selftest........................OK!
CPLD selftest..............................OK!
Switch chip selftest.......................OK!
PHY selftest...............................OK!
Please check leds....................FINISHED!
User interface aux0 is available.