H3C S3100V2-52TP Installation Guide

23
Press ENTER to get started.
If "Press ENTER to get started" appears, the automatic startup of the switch is complete.
Press Enter, and the following prompt appears:
<H3C>
You can now configure the switch.
NOTE:
For more information about the configuration commands and command line interface, see the
H3C
S3100V2-52TP Switch Configuration Guides
and the H3C S3100V2-52TP Switch Command References .

H3C S3100V2-52TP Specifications

General

Brand	H3C
Model	S3100V2-52TP
Category	Switch
Language	English