Safety Decals
12
• Green Circle - Describes a recommended action.
• Black Circle - Gives information about machine or accessory operation.
F1.1: Example Safety Decal Symbols: [1] Hazard Description, [2] Prohibited Action, [3]
Recommended Action.
1.6.1 Decal Symbols Reference
This section gives explanations and clarifications for the safety symbols you will see on
your machine.
T1.3: Hazard Symbols – Yellow Triangles
Symbol Description
Moving parts can entangle, trap, crush, and cut.
Keep all parts of your body away from machine parts when they move, or
whenever motion is possible. Motion is possible when the power is on and
the machine is not in [EMERGENCY STOP].
Secure loose clothing, hair, etc.
Remember that automatically controlled devices can start at any time.
Do not touch rotating tools.
Keep all parts of your body away from machine parts when they move, or
whenever motion is possible. Motion is possible when the power is on and
the machine is not in
[EMERGENCY STOP].
Sharp tools and chips can easily cut skin.
To Next Page
Loading...
