Maintenance
51
Chapter 9: Maintenance
9.1 Introduction
Regular maintenance is important to make sure that your machine has a long and
productive life with minimal downtime. The most common maintenance tasks are simple
and you can do them yourself. You can also ask your HFO about their comprehensive
preventive maintenance program for complex maintenance tasks.
9.2 UMC-750 Maintenance Schedule
T9.1: Maintenance Schedule Table
Maintenance Item Interval
Automatic Tool Changer - SMTC
Clean the chips from the tool changer. Weekly
Inspect the arm plunger and adjuster
assembly.
Six Months
Grease the tool changer cams. Annually
Auxiliary Filter
Replace the filter bag. Check the Gauge
Inspect the hoses for cracking. Six Months
Axis Lubrication
Inspect grease reservoir level. Monthly
Inspect the hoses for cracking. Six Months
Electrical Cabinet
Clean vector drive air vents / filter. Monthly
Enclosure
Inspect windows for damage. Daily
Inspect the door interlock operation. Daily
To Next Page
Loading...
