Introduction
21
T2.2: General Requirements
T2.3: Standard Features
2.5 UMC-750P Specifications
T2.4: UMC-750P Specifications
General Requirements
Air Required 4 scfm, 100 psi 113 L/min, 6.9 bar
Coolant Capacity 75 gal 284 L
Power Requirement, Low Voltage 195-260 VAC / 100A
Power Requirement, High Voltage 354-488 VAC / 50A
Machine Weight 18,000 lb 8165 kg
Standard Features
Tool Center Point Control (TCPC), Dynamic Work Offsets (DWO), Remote Jog Handle*,
Second Home*, Macros*, Spindle Orientation (SO)*, Coordinate Rotation and Scaling (COORD)*,
TSC-Ready, Wireless Intuitive Probing System (WIPS)
*Refer to the Mill Operator’s Manual (96-8210) for information on these features.
Travels
S.A.E Metric
X Axis 30" 762 mm
Y Axis 20" 508 mm
Z Axis 20" 508 mm
A-Axis Rotation 360° Rotation
B-Axis Tilt -45° to +45°
Spindle Nose to Table (max.) 25" 635 mm
To Next Page
Loading...
