UMC-750P Specifications
22
T2.5: General Requirements
Spindle Nose to Table (min.) 5" 127 mm
For detailed machine dimensions, including work envelope information, refer to the UMC-750
Machine Layout Drawing on www.haascnc.com.
Table
Width 14.75" 375 mm
Length 33" 838 mm
T-Slot Width 5/8" 16 mm
T-Slot Center Distance N/A
Number of Standard T-Slots 1
Max. Weight on Table (evenly
distributed)
660 lb 300 kg
General Requirements
Air Required 4 scfm, 100 psi 113 L/min, 6.9 bar
Coolant Capacity 75 gal 284 L
Power Requirement, Low Voltage 195-260 VAC / 100A
Power Requirement, High Voltage 354-488 VAC / 50A
Machine Weight 18,000 lb 8165 kg
Travels
S.A.E Metric
To Next Page
Loading...
