Haas UMC-750 User Manual

i
© 2017 Haas Automation, Inc.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or
transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or
otherwise, without the written permission of Haas Automation, Inc. No patent liability is assumed with
respect to the use of the information contained herein. Moreover, because Haas Automation strives
constantly to improve its high-quality products, the information contained in this manual is subject to
change without notice. We have taken every precaution in the preparation of this manual; nevertheless,
Haas Automation assumes no responsibility for errors or omissions, and we assume no liability for
damages resulting from the use of the information contained in this publication.

Haas UMC-750 Specifications

General

Machine Category	Universal Machining Center
C Axis Travel	360 degrees
Tool Capacity	40+1
Travels X Axis	30 in (762 mm)
Travels Y Axis	20 in (508 mm)
Travels Z Axis	20 in (508 mm)
Spindle Speed	8100 RPM
Spindle Motor	30 hp (22.4 kW) vector drive
Spindle Taper	40
Control	Haas
Tool Changer Capacity	40+1