Maintenance
53
Inspect the coolant concentration. Weekly
Completely clean the coolant tank and replace
the coolant.
Six Months
Clean the standard coolant filter. Six Months
Verify the coolant refill is operating correctly. Six Months
Spindle
Clean and lubricate the spindle taper. As required.
Check the spindle drawbar force. Annually
Spindle Lubrication
Inspect lubrication tank level. Monthly
Tooling
Grease the pull studs. As required.
Through Spindle Coolant (TSC)
Clean the TSC filter. Six Months
Inspect the hoses for cracking. Six Months
Verify that the auto-clean feature is operating
correctly.
Six Months
Maintenance Item Interval
To Next Page
Loading...
