Hach 2100P User Manual

5
CERTIFICATION
Hach Company certifies this instrument was tested thoroughly,
inspected and found to meet its published specifications when it was
shipped from the factory.
The Model 2100P Portable Turbidimeter has been tested and is certified
as indicated to the following instrumentation standards:
Product Safety
Battery/Eliminator Power Supply Only:
120 Vac, 60 Hz, UL Listed & CSA Certified, Class 2
230 Vac, 50 Hz, VDE Approved, GS & CE marked
Immunity
2100P Turbidimeter Tested with external Battery/Eliminator
Power Supply:
EN 50082-1 (European Generic Immunity Standard) per 89/336/EEC
EMC: Supporting test records with Dash Straus and Goodhue, Inc.
(now Intertek Testing Services), certified compliance by
Hach Company.
Standards include:
IEC 801-2 Electro-Static Discharge
IEC 801-3 Radiated RF Electro-Magnetic Fields
IEC 801-4 Electrical Fast Transients/Burst
Emissions
2100P Turbidimeter Tested with external Battery/Eliminator
Power Supply:
EN 50081-1 (Emissions) per 89/336/EEC EMC: Supporting test
records by Amador Corp. (now TUV Product Services), certified
compliance by Hach Company
Standards include:
EN 55022 (CISPR 22) Emissions, Class B Limits
Canadian Radio Interference-Causing Regulation, Chapter 1374,
Class A: Supporting test records by Amador Corp. (now TUV Product
Services), certified compliance by Hach Company
This Class A digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.

Hach 2100P Specifications

General

Range	0 to 1000 NTU
Light Source	Tungsten filament lamp
Detector	Silicon photodiode
Operating Temperature	0 to 50 °C (32 to 122 °F)
Power	4 AA alkaline batteries
Resolution	0.01 NTU
Measurement Principle	Nephelometric
Display	LCD