Hach 2100P - Page 75

75
Replacement Parts & Accessories, continued
OPTIONAL ACCESSORIES AND REAGENTS, continued
Description Cat. No.
Pipet, TenSette
®
*, 1-10 mL...................................................... 19700-10
Pipet Tips, for 1-10 mL TenSette Pipet, 50/pkg ....................... 21997-96
Pipet Tips, for 1-10 mL TenSette Pipet, 1000/pkg ................... 21997-28
Pipet, Volumetric, Class A, 1.00 mL ........................................ 14515-35
Pipet, Volumetric, Class A, 5.00 mL ........................................ 14515-37
Pump, Vacuum, Hand-Operated ............................................... 14283-00
Pump, Vacuum, 115 V, 60 Hz................................................... 14697-00
Pump, Vacuum, 230 V, 50 Hz................................................... 14697-02
Sample Degassing Kit .............................................................. 43975-00
Sample Filtration and Degassing Kit........................................ 43975-10
StablCal
®
Calibration Set for 2100P Turbidimeter
<0.1, 20, 100, 800 NTU, 500 mL each ................................. 26594-00
<0.1, 20, 100, 800 NTU, 100 mL each ................................. 26594-10
<0.1 NTU** StablCal
®
*** Stabilized
Formazin Standard,100 mL................................................... 26597-42
20 NTU StablCal
®
Stabilized Formazin Standard, 100 mL..... 26601-42
100 NTU StablCal
®
Stabilized Formazin Standard, 100 mL... 26602-42
800 NTU StablCal
®
Stabilized Formazin Standard, 100 mL... 26605-42
Triton-X Solution, 118 mL (4 oz) ............................................ 14096-32
Volumetric Flask, 100 mL ........................................................ 14574-42
Volumetric Flask, 200 mL ........................................................ 14574-45
* TenSette™ is a Hach Company trademark.
** <0.1 NTU StablCal
®
Standard is used in place of dilution water
standard when performing a calibration.
*** StablCal
®
is a registered trademark of Hach Company.