Hach DR/2010 - Page 81

81
The display will show (for example):
6. The instrument displays the next available user-entered program
number on the right side of the display (flashing). To copy the
source program as the displayed number (951 in this case), press
ENTER. To copy the program to another program number, use the
NUMERIC keys to enter the desired number, or scroll to the desired
number using the
ARROW keys. Then press ENTER. Record the chosen
number for future reference.
7. The display will show:
then:
Go to section 3.10 Creating A User Program, step 23, for instruction
on entering data into the calibration table.
nm
+8.8.:8.8. ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
888500
* Coðù 968 ~ 951
nm
+8.8.:8.8. ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
888500
* Proçram Coðied
nm
+8.8.:8.8. ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
888500
* Coðù Proçram