23
Standard Operations
• If the instrument is not used during a longer period
(1–12 hours).
• If the instrument will never be switched off.
1. Press Lamp Control in the Instrument Setup.
2. Select On to switch on the Lamp.
3. Select Save: in order to define a time interval for the burning
time of the lamp.
4. Press the field below Save to select the lamp burning time.
5. Select the length of time the lamp will be switched on.
Note: After this period of time the lamp will automatical turn off, after
no measurement has been made.
Note: The lamp will be restarted automatically for measurements.
6. Press OK to confirm.
To Next Page
Loading...
