25
Standard Operations
Printer Setup:
• Resolution: Font size
• Paper: Paper size
Note: If an optional Thermal Printer is connected, the function "Auto Send"
on/off is available.
3. Select Auto-Send: On to send all measured data automatically
to the Thermal printer.
Note: The option Auto-Send is not available for any other printer (e.g. ink
jet printer).
4. Press Resolution to select the print quality.
Select between
• 100 dpi
• 150 dpi
• 300 dpi
5. Press OK to confirm.
Note: Press OK again to return to the Instrument Setup menu.
To Next Page
Loading...
