10
Installation
3.2 Powered via rechargeable batteries
The instrument is operated by six rechargeable NiMH batteries (Figure 2).
3.2.1 Inserting the rechargeable batteries
1. Press in both catches at the same time and release the cover.
2. Take the battery holder out of the battery compartment (Figure 2).
3. Insert the delivered six rechargeable NiMH batteries into the battery holder. Take note
of the markings for the polarity.
Note: Make sure that the rechargeable batteries have been inserted into the battery compartment
correctly.
4. Connect the battery holder to the battery clip.
5. Push the battery holder into the battery compartment.
6. Push the cover onto the battery compartment until it audibly engages in the catches.
WARNING
Risk of fire and explosion. Only use rechargeable NiMH batteries and ensure that the
rechargeable NiMH batteries are inserted correctly in the battery compartment. Incorrect insertion
of the rechargeable NiMH batteries may damage the instrument or lead to fire or explosions.
WARNING
Risk of fire and explosion. When using not rechargeable AA batteries, the not rechargeable
batteries could explode if the instrument is connected to the charger. Only use rechargeable
NiMH batteries from the manufacturer of the instrument.
NOTICE
Remove the rechargeable NiMH batteries if the instrument is not to be used for a period of time.
Only use rechargeable NiMH batteries from the manufacturer of the instrument.
To Next Page
Loading...
Need help?
General
