13
Installation
3.3 Connecting the probe
Remove the protective cap and connect the probe plug to the instrument (Figure 5).
Figure 4 Charging the rechargeable batteries
1 Charger
1
4 Charging socket
2 Discharge button (yellow) 5 LED lamp (green => rechargeable batteries fully charged)
3 Charging plug 6 LED lamp (red => rechargeable batteries currently charging)
1
The battery charger must agree with local and national safety regulations and may not be part of the shipment. If the charger
is not part of the shipment, charge the batteries with a charger available in your country. Make sure that the charger agrees
the battery specifications.
To Next Page
Loading...
Need help?
General
