Transmitter 9125 – Conductivity / resistivity measurement
Page 11
2. Installation of the transmitter
Unpacking of the transmitter 9125
Inspect the package at the reception to detect an
eventual damage due to the transport. Make sure the
package contents are not damaged.
Check if the package corresponds to your order :
x quantity delivered,
x type of instrument and version accordingly to the
instruction plates,
x accessories : 4 cable glands and 2 mounting
screws + flanges,
x instruction manual,
x certificate of conformity to specifications.
Advice for installation
Choose a site where :
x vibrations are not too excessive,
x supply relays or commuters are away,
x maintenance will be easy.
Note :
Information : It is preferable to mount the
instrument above eye level, allowing an
unrestricted view of the front panel displays and
controls.
To Next Page