Transmitter 9125 – Conductivity / resistivity measurement
Page 36
PARAMETERS Menu
This menu displays the calibration parameters of the
conductivity measurement.
Date of last calibration. This date is the date the user
has entered after a conductivity calibration ( electric, 2
points, 1 point).
The other parameters are those which are displayed
when the date is registered :
x Slope of the last calibration which is a correction
factor of the conductivity probe slope.
x Si la mesure est effectuée en TDS, le coefficient
de proportionnalité entre la conductivité et la
concentration.
x Drift of the temperature measurement.
HISTORIC Menu
This menu displays the conductivity slopes
corresponding to the last two conductivity calibrations
and allows to follow the probe clogging.
To Next Page
Loading...
