Hach POLYMETRON 9125 - Service and Utility Functions

Transmitter 9125 – Conductivity / resistivity measurement
Page 51
S/POLARIZATION Menu
This menu is displayed only if you use a 2 electrode
probe.
CABLE CAP.
CABLE measure the electrode cable capacity.
It is mandatory to disconnect the probe connector to
measure the capacity or to make an electric
calibration.
TEST
TEST measure the electrode polarization (see
Chap. 5). An error message is displayed if the
polarization is superior to 0,25.

CAP. CABLE
TEST
POLARIZATION
Select

CAPACITY
1.02 nF
CABLE CAP.

POLARIZATION
0.15
TEST
CABLE CAP.