Hach POLYMETRON 9125 - Temperature Compensation; TDS Coefficient Adjusting

Transmitter 9125 – Conductivity / resistivity measurement
Page 40
TEMPERATURE COMPENSATION
MEASURE :
- No
- Pt 100
- Pt1000
Choice of a temperature
measurement with or without
Pt100 / Pt1000.
TYPE : - No
- Auto.
- Manual
Choice between no temperature
compensation or an automatic or a
manual temperature compensation
mode.
TEMP. : XX Possibility to enter the sample
temperature in a manual
compensation.
TREF : XX Possibility to enter the reference
temperature.
COMP. : - Coef.
- HCl
- NaCl
Possibility to choose the
temperature compensation.
COEF : XX Possibility to enter the coefficient
value.
TDS coefficient adjusting
TDS coefficient adjusting is directly in the MEASURE
menu.
Utilize the left function touch to choose the TDS
adjusting.
TDS : Choose the TDS coefficient which is necessary
to calculate the solution concentration.
Utilize the right function touch to choose a value
between 0 and 5.

MEASURE :
TYPE : Manual
TEMP. : 15°C
TREF. : 025.0°C
COMP. : Coeff.
COEF. : 2.0%
TEMP. COMP.
Select
Pt100

PROBE
TEMP. COMP. :
TDS : 0.50

MEASURE
Select
0.50