What causes the electrode potential to be null when measuring with Hach polymetron 9240 Measuring Instruments?
A null electrode potential during measurement with Hach Measuring Instruments can occur if there is no electrolyte in the electrode, possibly due to leakage, or if there is no sample in the cell. Check parts and change the electrolyte.
Why is the electrode potential negative in Hach polymetron 9240 Measuring Instruments?
A negative electrode potential in Hach Measuring Instruments may be due to a connection problem (loose contact) to the anode circuit or a leak of electrolyte. Check parts and change the electrolyte.
Why is the wrong output current displayed on Hach polymetron 9240 Measuring Instruments?
General| Brand | Hach |
|---|---|
| Model | polymetron 9240 |
| Category | Measuring Instruments |
| Language | English |
Legal disclaimer about accuracy and liability of the information provided in the manual.
Provides contact details for Hach Lange's manufacturing site and European HQ.
General safety instructions, precautions, and explanation of hazard symbols.
Information on WEEE directive and product disposal requirements in Europe.
Guidelines for returning and disposing of old or end-of-life equipment.
Information regarding the RoHS directive and hazardous substance content.
Detailed performance and environmental specifications of the analyzer.
Explanation of the analyzer's model identification matrix.
Outlines the instrument's warranty period and limitations.
General introduction to the analyzer and the Nernst law principle.
Illustration and legend of the analyzer's working principle components.
Visual presentation of the analyzer's front, rear panels, and pumps box.
Recommends Diisopropylamine (DIPA) as conditioning reagent and compares alternatives.
Explains pH regulation for non-cationic and cationic applications.
Details the measurement process, steps, cycle, and smart rinse option.
Overview of the analyzer's automatic calibration process.
Overview of the analyzer's manual calibration process.
Details the grab sample measurement process and cycle.
Tables showing screen, analog, alarm, and RS485 outputs during processes.
Describes optional features like K-Kit, heat exchanger, and extra channels.
Instructions for inspecting and unpacking the instrument upon arrival.
Preliminary checks and considerations before installing the analyzer.
Guidance on mounting the instrument on a panel or wall.
Step-by-step guide for installing the analyzer, including connections.
Instructions for stabilizing the analyzer after installation before calibration.
Setting system and user parameters followed by initial calibration.
Explains how to enter and update data fields using the analyzer's interface.
Overview of the analyzer's display screens: principal, historical, and alarms.
Accessing and navigating the main menu structure and its options.
Diagram providing a comprehensive view of the analyzer's menu hierarchy.
Overview of the various options available within the System Setup menu.
Instructions for setting the system date and time parameters.
Configuring display parameters like language, concentration units, and temperature units.
Setting and managing passwords for menu access and security.
Procedure for loading factory default configuration settings.
Calibrating and adjusting analog mA output signals for the analyzer.
Access to factory settings, reserved for qualified service personnel.
Overview of the various options available within the User Setup menu.
Setting measurement parameters like target pH, gas/water ratio, and timings.
Setting up system and warning alarms, including their parameters and tables.
Configuring analog mA output parameters, including type, mode, and scale.
Configuring RS485 or PROFIBUS communication parameters.
Setting up parameters for sample channels, including activation and naming.
Introduction to calibration, methods, and prerequisites for accurate results.
Specifies required concentrations for manual and automatic calibration solutions.
Overview of the various options available within the Calibration menu.
Initiating manual calibration processes like known addition and point calibrations.
Setting up automatic calibration schedules and parameters for regular intervals.
Display and interpretation of calibration results and acceptance criteria.
Viewing historical calibration data, including date, time, and slope/offset values.
Manually adjusting measurement values for minor corrections.
Calibrating the analyzer's temperature electrode.
Suggested schedule for routine analyzer maintenance tasks.
Procedure for replacing the internal backup battery.
Guidance on replacing the local controller board.
Instructions for replacing fuses in the instrument.
Recommendations for cleaning the analyzer's exterior.
Accessing maintenance and diagnostic procedures via the software menu.
Overview of the Maintenance and Diagnostics menu.
Procedures for managing reagent bottles and consumption.
Verifying the correctness of the last calibration.
Checking electrode functionality by examining raw values.
Testing analyzer accessories, alarm relays, and logical inputs.
Performing manual sensor reactivation.
Procedure for safely shutting down the analyzer for extended periods.
Steps for starting up the instrument after a period of inactivity.
Displaying installed software versions for informational purposes.
Table of common malfunctions, their causes, and remedies.
Table for diagnosing issues related to measurement precision.
Table of miscellaneous problems and their causes/solutions.
Lists accessories, options, and maintenance kits with part numbers.
Lists spare parts for components that come into contact with the sample.
Lists spare parts for components in contact with the cell or electrodes.
Lists spare parts for components in contact with reagents or standard solutions.
Lists electronic components and their corresponding part numbers.
Lists additional hardware accessories available for the analyzer.
Table detailing default and possible values for user configuration options.
Material Safety Data Sheet for Diisopropylamine (DIPA).
Material Safety Data Sheet for Potassium Chloride.
Material Safety Data Sheet for Sodium Chloride.
Material Safety Data Sheet for Sodium Nitrate.
Instructions for preparing the conditioning reagent (DIPA).
Procedures for preparing standard solutions for calibration and grab samples.
Preparation of the 10 ppm Na automatic calibration solution.
Procedure for preparing the 3M KCl solution.
Procedure for preparing the 0.5M NaNO3 solution.
To Next Page
