112
Advanced Operations
TEST/MAINT
Default value: DISABLED
This menu works independently from the simulation.
DISABLED: Normal operation mode
ENABLED: Sets the TEST/MAINT bit (0x0040) of every status register of every configured slave
to indicate the “Service” mode.
VERSION Displays the current software version of the Modbus network adapter card.
LOCATION Displays the current location.
SYSTEM SETUP
NETWORK MODULES
FIELDBUS
Figure 66 Modbus simulation mode
1 Time (x-axis) 4 Minimum
2 Period 5 Maximum
3 Period 6 Simulated value (y-axis)
Table 38 Color/line code for Figure 66
First floating point value
To Next Page
Loading...
