Haier LTF47K1a - Page 35

| HD Ready LCDTV | User Manual |
p.33
MENU OPERATION
HDMI Scan Info (HDMI only):
When you use HDMI mode, you can
choicethefollowmode.See g. 53.
- Automatic: Set to underscan or
overscanautomaticallywhenthe
video signal is detected.
- Underscan: When the video
signalisdetected,allactivepixels
andlinesaredisplayedwithor
withoutborder.
- Overscan: When the video signal
isdetected,someactivepixels
and lines at the edges are not
displayed.
Reset Default
- To reset all TV settings, including
stored channels, to their original fac-
tory values.