Hakko Electronics Monitouch V7 Series - Page 118

7
1. Error Message 7-5
Error Correction
3. Warning
An error may be displayed on the Main Menu screen during data transfer.
This is a warning message.
For the warning details and solutions, refer to the Reference Manual (Function) and correct screen
data.
2002-4 -1 21:52:36
SYSTEM PROG. VER. 1.000
FONT
VER.1.300/1.000/1.000
ENGLISH
I/F DRV VER.1.250
MELSEC QnH Q
CPU Port
Editor:MJ1
Main Menu V710iT
System Information
PLC Type : MITSUBISHI QnH(Q) series CPU
Comment :
Screen Data
Information
Size : 5111808
Ethernet
Card
Menu
I/O Test
Data has some error.
Warning:207
SRAM/Clock
PLC Stat. No. : 0
Send Delay : 2 0msec
Retry : 3
Error : Stop
Time-Out : 1.00 sec
Connection : 1 : 1
Signal Level : RS232C
Baud Rate : 19200
Data Length : 8
Stop Bit : 1
Parity : Odd
Ethernet Information
Trans.Speed : 10BASE-T
Stat. No. : 192.168.1.68
PORT : 10000
MAC : 0050FF000035
Warning message