13
First Operation
2 First Operation
2.1 Instruction
Instruction is required
before first oper-
ation. First instruction into handling of
the machine must be held by a qualified
person sent by your local PowerBoss
contract dealer. Your PowerBoss deal-
er will be informed by the manufacturer
upon delivery of the vehicle and will
contact you to make a date for instruc-
tion.
2.2 Initial charging procedure
Before first operation of the
machine, fully charge the bat-
tery with an initial charging pro-
cedure and comply with the op-
erating instructions of the
charg
er as well as with those of
the battery manufacturer. Pow-
erBoss cannot be held liable
for
damages resulting from an
insufficient initial charge.
2.3 Before Putting into Operation
Complete the following inspections be-
fo
re taking the machine into operation:
1. Check the area around the machine
for signs of leakage. Hoses, lines
and tanks must be free from any
leakage or damage.
2. Install brushes and squeegee, see
ma
intenance chapter.
3. Install batteries and connect battery
plug, see maintenance chapter.
4. Check battery charge and proceed
to
re-charging of batteries if required.
Generally proceed to initial charging
before first operation of the machine.
5. Empty recovery tank and clean it if
required, see maintenance chapter.
6. Re-fill solution tank and add cleaning
age
nt according to the manufactur-
er's recommendations.
Use only cleaning agents suit-
able for automatic machines
(low-foamin
g) and comply with
the instructions for use, dispos-
al and with the warning infor-
mation specified by the clean-
ing agent's manufacturer.
To Next Page
Loading...
