57
Maintenance and Service
5.10.1 Cleaning the brush head
Check the brush head daily and clean it
as nece
ssary.
1. Switch off the machine with the main
switch.
2. Lift out the brush head with the brush
hea
d lift.
3. Loosen the slotted-head screw (Fig.
20/1) with a coin and pivot the cover
(Fig. 20/2) upwards.
4. Remove the brushes (Fig. 20/6) from
the brush head and clean them.
When installing the brushes,
pay attention that they latch se-
curely and properly in the
catches (Fig. 20/5) provided.
5.10.2 Changing the brushes
Check the brush head weekly and
chang
e it as necessary.
1. Switch off the machine with the main
switch.
2. Lift out the brush head with the brush
hea
d lift.
3. Loosen the slotted-head screw (Fig.
20/1) with a coin and pivot the cover
(Fig. 20/2) upwards.
4. Remove the brushes (Fig. 20/6) from
the brush head.
5. Install the new brushes and secure
th
e cover again with the slotted-head
screw. Only use original spare parts!
When installing the brushes,
pay attention that they latch se-
curely and properly in the
catches (Fig. 20/5) provided.
5.10.3 Cleaning the waste container
Check the waste container daily and
cl
ean it as necessary.
1. Lower the brush head. Switch off the
machine with the main switch.
2. Pivot the waste container (Fig. 20/3)
down a little and pull it out of the
b
rush head.
3. Clean the waste container and then
re
install it.
To Next Page
Loading...
