HAKO Scrubmaster B45 - Changing the Sealing Strips; Checking the Spray Jets; Change Deflector Roller

58
Maintenance and Service
5.10.4 Changing the sealing strips
Check the sealing strips (Fig.
20/7)
weekly and change them as necessary.
1. Switch off the machine with the main
switch.
2. Lift out the brush head with the brush
he
ad lift.
3. Loosen the knurled screws (Fig. 20/
9) and remove the sealing strips with
the tigh
tening straps.
4. Assemble the new sealing strips so
that they touch the ground lightly.
Only use original spare parts!
5.10.5 Checking the spray jets
Check the spray jets daily and clean
them as necessary.
1. Switch off the machine with the main
switch.
2. Lift out the brush head with the brush
he
ad lift.
3. Check the spray jets (Fig. 20/8) for
signs of dirt. After cleaning them, the
spray jets mu
st produce an even
spraying pattern.
5.10.6 Change deflector roller
Check deflector rollers (Fig. 20/4) at
weekly intervals and replace if required.