14
First Operation
2.4 Switching the machine on
Before switching the machine
on, please read the safety in-
formation in Chapter 1.
Carry out the following preliminary work
so that the machine is ready to operate:
• If necessary, disconnect the power
plug of the charging device from the
socket and place it in the holder. If
the power plug is not inserted prop-
erly in the holder (Fig. 3/1), the ma-
chine is not ready to operate!
Fig.3
• Switch the machine on by actuating
the switch (Fig. 4/1) from position (0)
to position (1).
Fig.4
To Next Page
Loading...
