English |
627075/03
160029
HAMILTON-C6 Installation Guide
Trolley Solution Assembly
Hamilton Medical | HAMILTON-C6 Trolley Solution Assembly
7
Required tools
Slotted screwdriver (size: # 3 or # 4)
Allen key (sizes: 5 mm and 6 mm)
Components
1 x Interaction Panel (IP) / monitor
*
1 x Ventilator Unit (VU)
*
1 x IP mounting kit (PN 160181)
Contains:
1 x IP mounting post
1 x Hex socket cap screw, M8 x 55 mm
1 x Dock washer, 32 (OD) x 9 (ID) x 7 (H) mm
* Not included. Must be ordered separately with PN 160021.
Note: See the Trolley Assembly Chapter for details on how to assemble the trolley.
The ventilator power cable is country-specific. Order the power cable specific to th
mains power outlet of your country.
A VU-IP cable (PN 952300 (0.65 m), or PN 160785 (3 m), or PN 160786 (10 m))
is required for the installation. Not included.
Safety information
A
B
C
C1
C2
C3
The weight of the package for the IP and the VU with
rail is 20 kg (44 lb). Two persons are necessary to lift
the IP and the VU package or use an applicable lifting
equipment.
A
C1
B
C2
C3
C
IP mounting kit:
Tests and checks after installation
For details on the electrical safety tests and preoperational
checks on the HAMILTON-C6 ventilator, see Chapter 1 –
Ventilator Unit and Interaction Panel Overview.
Fill in the HAMILTON-C6 ventilator Testing and Acceptance
Report after the initial installation. See Chapter 20.
To Next Page
Loading...