Hamilton C6 - Chapter 4 Shelf Mount Solution Assembly

English |
627075/03
160030
HAMILTON-C6 Installation Guide
Shelf Mount Solution Assembly
Hamilton Medical | HAMILTON-C6 Shelf Mount Solution Assembly
11
Required tools
Torx T20 screwdriver for cable clip assembly
Components
Interaction Panel (IP) / monitor
*
Ventilator Unit (VU)
*
IP stand
Ventilator power cable
**
VU-IP cable (PN 160785)
**
Length: 3
m
* Not included. Must be ordered separately with PN 160021.
** Not included. Must be ordered separately.
Note: The ventilator power cable is country-specific. Order the power cable specific to th
mains power outlet of your country.
A 10-meter (PN 160786) VU-IP cable is also available.
Safety information
A
B
C
D
E
The weight of the IP with shelf-mount and the VU with
shelf-mount package is 20.5 kg (45.2 lb). Two persons
are necessary to lift the IP and the VU or use an
applicable lifting equipment.
Assemble the interaction panel and the ventilator unit
on a shelf that can support the combined weight
(20.5 kg (45.2 lb)).
•
•
The weight of the IP with shelf-mount is 10 kg (22 lb)
and the weight of the VU with shelf-mount is 10.5 kg
(23.15 lb).
D
E
A
B
C
Tests and checks after installation
For details on the electrical safety tests and preoperational
checks on the HAMILTON-C6 ventilator, see Chapter 1 –
Ventilator Unit and Interaction Panel Overview.
Fill in the HAMILTON-C6 ventilator Testing and Acceptance
Report after the initial installation. See Chapter 20.