EasyManua.ls Logo

Hamilton C6 - Chapter 5 Combined Shelf Mount Solution Assembly

Hamilton C6
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English |
627075/03
160060
HAMILTON-C6 Installation Guide
Combined Shelf Mount Solution Assembly
Hamilton Medical | HAMILTON-C6 Combined Shelf Mount Solution Assembly
13
Required tools
Slotted screwdriver (size: # 3 or # 4)
Spanner/wrench: BS 13 mm or 1/2” AF
Allen key (size: 5 mm and 6 mm)
Components
1 x Interaction panel (IP) / monitor
*
1 x Ventilator Unit (VU)
*
1 x Hex socket cap screw, M8 x 55 mm
1 x Dock washer, 32 (OD) x 9 (ID) x 7 (H) mm
1 x IP mounting post
1 x VU column
4 x Countersunk hex socket screws for mounting VU,
M8 x 20 mm
1 x Tubing support arm with quick-lock socket set
(PN 160153)
**
1 x M14 washer
1 x Base plate
1 x Hex socket cap screws, M6 x 50 mm
***
2 x Hex socket cap screws, M6 x 14 mm
***
2 x Slot-nuts
***
* Not included. Must be ordered separately with PN 160021.
** Not included. Must be ordered separately.
*** Screws and slut-nuts for mounting the HAMILTON-C6 ventilator unit on the VU column.
Note: The ventilator power cable is country-specific. Order the power cable specific to the
mains power outlet of your country.
A VU-IP cable (PN 952300 (0.65 m), or PN 160785 (3 m), or PN 160786 (10 m)) is
required for the installation. The VU-IP cable must be ordered separately.
Safety information
A
B
C
D
E
F
G
H
I
J
K
L
M
The weight of the package for the multishelf mount is
33 kg (73 lb). Two persons are necessary to lift
the IP and the VU package or use an applicable lifting
equipment.
Contains:
H1 1 x Tubing support arm with quick-lock socket
H2 1 x Quick-lock socket
H3 1 x M8 washer
H4 1 x Hex bolt with reverse thread (fully threaded),
M8 x 12 mm
The base plate (Item E) has two different mounting
positions to mount the ventilator unit and the tubing
support arm with quick-lock socket. This provides
flexibility to orientate the position of the combined
shelf mount assembly.
Tests and checks after installation
For details on the electrical safety tests and preoperational
checks on the HAMILTON-C6 ventilator, see Chapter 1 –
Ventilator Unit and Interaction Panel Overview.
Fill in the HAMILTON-C6 ventilator Testing and Acceptance
Report after the initial installation. See Chapter 20.

Related product manuals