Hamilton C6 - Chapter 14 Tubing Support Arm with Quick-Lock Assembly

English |
627075/03
160153
HAMILTON-C6 Installation Guide
Tubing Support Arm with Quick-lock Assembly
Hamilton Medical | HAMILTON-C6 Tubing Support Arm with Quick-lock Assembly
47
Required tools
Spanner/wrench: BS 13 mm or 1/2” AF
Components
1 x Plastic tubing holder, double (PN 281673)
1 x Tubing support arm with quick-lock (PN 160153)
1 x Quick-lock socket
1 x M8 washer
1 x Hex bolt, reverse thread (fully threaded),
M8 x 12 mm
Note: A HAMILTON-C6 ventilator (Trolley Configuration PN 160029) is required for
the installation. Not included.
Safety information
A
B
C
D
E
Lock the trolley wheel brakes before you start the
installation.
You can mount the tubing support arm with quick-lock
on the left or right side of the ventilator unit handle.
C
D E
A
B