22
English | 627075/03
4
Install the VESA adapter plate
Install the VESA mount bracket
5
2
How to mount the VESA mount bracket on the rear of the IP
1
3
Remove the swivel-mount assembly
VESA mount specification:
VESA mount bracket thickness: maximum of 2 mm
VESA mount bracket screw holes dimensions:
100 mm (L) x 100 mm (H)
Recommended screws:
4 x Hex socket head cap screws, thus
M4 x 15 mm + [thickness (x mm)] of the VESA
mount bracket
•
•
•
The maximum length of the recommended screws for
mounting the VESA mount bracket on the rear of the IP
must not be more than 20 mm.
To Next Page
Loading...