Introduction
BATTERY BACK UP
Your XK-3C uses a battery-backed RAM to remember your changes to the Parameters.
When the battery voltage becomes low, the Display will show:
If you see these messages, you should immediately back up your parameter changes, if you have made any.
If there is no battery installed in the unit, or if the battery is compeletely dead, the Display will show:
After the above message is displayed, the XK-3C will re-initialize itself, and the factory default settings will
be restored (except Combination Presets, Leslie Cabinets and Cutsom Tone-Wheels). Therefore, it is a good
idea to periodically save your data to CompactFlash card.
CAUTION: In order to change batteries, be sure to ask your dealer or store.
To Next Page
Loading...
Need help?
General
