*#1 :-%Owner’s Manual
54
SHORT CUT TO THE FUNCTION MODE
Each button on the panel has a “SHORT-CUT” capability, so that you can easily go
to each Function mode. By holding down the button, you can easily go to the desired
mode display. You can save time to search the page for the parmeters you want to
change.
For example, if you want change the Percussion setting, you can go
to the PERCUSSION FUNCTION MODE display, by holding down
either [SECOND], [THIRD], [FAST], or [SOFT] for a while. This is
called “SHORT CUT”.
Short-cut buttons will be explained in the next Chapter “SETTING
THE PARAMETER”.
NOTE: You can change the time for holding down the button for “SHORT
CUT”. (P. 65 #21)
RECORD THE PAGE YOU FREQUENTLY USE
You can record the page which your usually use, and go to that page by only touch-
ing the [CONTROL] button.
Example of operation: Record the Drawbar - Pedal Page
1
2
Touch and Hold
Touch
Go to the page to be recorded by using MENU etc.
Touch and hold the [REC/JUMP] , and touch the [CONTROL]
button.
Next time, you can come to this page by only touching the
[CONTROL] button.
Example of operation: Move to the Percussion Function Mode.
Touch and Hold
To Next Page
Loading...
Need help?
General
