Using the Control Panel
51
FUNCTION MODE
The FUNCTION MODE is for making each setting and adjustment.
There are many displays, but the basic operation is the same.
HOW TO READ THE DISPLAY
BUTTON OPERATION IN THIS MODE
CURSOR
In the display window of this keyboard, the
CURSOR is displayed in the flashing style,
while the most popular indicator - cursor
used on the PC, the mobo, etc. is in the
shape of an arrow, a square or an I-shape.
This shows there are PAGEs
above (or below).
PARAMETER
PAGE
NAME
VALUE CURSOR
(Flashing VALUE)
This shows there is a PAGE on the
right (or on the left).
Returns to the PLAY
mode.
This button is used to move the CURSOR
right or left for selecting the PARAMETER to
change.
The CURSOR moves to the edge of the
display and on to the next page (on the right
or left), if there is one.
Touching this button while holding [REC/
JUMP] button, you can move to the right or
left page regardless where the cursor is.
The CURSOR increases or decreases
the value of the Parameter.
Holding it increases (or decreases) the
value continuously.
Touching it while holding the [REC/
JUMP] button increases (or decreases)
the value quickly.
The value can also be changed by the
[VALUE] knob on the right bottom
Moves from a page to
another.
You can jump to the
top or bottom page by
touching these buttons
with holding down the
[REC/JUMP] Button.
To Next Page
Loading...
Need help?
General
