*#1 :-%Owner’s Manual
88
MIDI STRUCTURE
KEYBOARD CHANNEL
UPPER
This is for sending and controlling the UPPER Part performance
information, switching the Combination Presets and sending/re-
ceiving Expression.
LOWER
This is for the LOWER Part performance information not only
for controlling but switching data of the Preset for the LOWER
Part independently.
PEDAL
This is for sending and receiving the PEDAL Part performance
information and controlling.
EXTERNAL ZONE CHANNELS
These channels are for controlling external MIDI equipment re-
spectively while using this unit as an easy master keyboard.
Making a different setting per each combination preset is pos-
sible.
EX. ZONE UPPER 1, 2, 3
This is for controlling the external MIDI equipment, using the
desired range of the internal keyboard on this organ.
EX. ZONE LOWER 1, 2
This is for controlling the external MIDI equipment by the MIDI
keyboard connected to the MIDI IN (LOWER) jack.
EX. ZONE PEDAL
This is for controlling the external MIDI equipment by the MIDI
keyboard connected to the MIDI IN (PEDAL) jack.
This organ has only a single keyboard. However, its sound engine provides 3 parts of
UPPER/LOWER/PEDAL, and, furthermore, 3 “EXTERNAL ZONES” for the inter-
nal keyboard of this organ and 3 for external keyboard, for controlling external MIDI
equipment.
For these special reasons, this unit has 9 MIDI channels.
To Next Page
Loading...
Need help?
General
