2
Table of Contents
Introduction 3
Radio System Setup 3
Additional Equipment Required 3
Additional Tools and Supplies Required 4
Contents of Kit 5
Field Equipment Required 6
Optional Field Equipment 7
Section 1: Assembling the Wings 8
Section 2: Joining the Wing Halves 10
Section 3: Installing the Aileron Servo Tray 14
Section 4: Assembling the Fuselage 18
Section 5: Installing the Wing Dowels 20
Section 6: Hinging the Vertical and Horizontal Stabilizers 21
Section 7: Installing the Tail 23
Section 8: Installing the Control Horns 27
Section 9: Assembling and Installing the Fuel Tank 29
Section 10: Installing the Main Landing Gear 32
Section 11: Installing the Nose Gear 34
Section 12: Installing the Engine 36
Section 13: Installing the Spinner 37
Section 14: Installing the Radio and Centering the Servos 38
Section 15: Installing the Linkages 42
Section 16: Plumbing the Engine 48
Section 17: Control Throw Recommendations 49
Section 18: Balancing the Solo 49
Section 19: Fine Tuning the Control Linkages 50
Pre-Flight Check 53
Pre-Flight at the Flying Field 54
AMA Safety Code 55
Glossary 56
To Next Page
Loading...
