Hangar 9 Solo - Additional Tools and Supplies Required

4
Adhesives
CA (cyanoacrylate) glue (thick)
6-minute epoxy
30-minute epoxy
Thread Lock (e.g., Blue Locktite 242)
Tools
Drill
Drill bits: 1/16′′, 5/32′′
Phillips screwdrivers
Z-bend pliers
Pliers
Small round file
Razor saw
Moto-Tool with sanding drum
Wax paper
Mixing stick
Epoxy brush
90-degree triangle
File
Medium sandpaper
Masking tape
Straight edge
Measuring device (e.g., ruler, tape measure)
Scissors
Paper towels
Rubbing alcohol
Felt tipped pen
Fuel tubing (9-10′′) (medium)
Clips (clothespins, binder clips)
Hobby knife with #11 blade
Radio packing foam
Additional Tools and Supplies Required
(not supplied)