CE model: optional maximum lifting height 6000 mm
This chart shows the
relationship between the location
of the load center distance and the
maximum load. Before loading,
check whether the load and load
center distance are within the
allowable range of bearing
capacity chart. If the shape of the
load is complex, place the heaviest
part of the load in the center of the
fork and close to the shelf.
Note; The vehicle tonnage value shown below is based on the load center distance of
500mm.
Cummins
QSF2.8T3NA49
Diesel engine
4TNE98-BQFLC
Diesel engine
Kubota
V2607-CR-TE5
B
Diesel engine
©
11/2019 HANGCHA GROUP CO., LTD
Actual Lifting Capacity
mm
Mast Model
RATED CAPACITIES AND LOAD GENTRES GRAPH
Load Center Distance B
Capacity With Mast Vertical
mm
kg
Attachment Model
Max.Lift Height A
Serial No.
RT
FOR INDUSTRIAL USE - ACCORDING TO STANDARD ISO 22915-2
FOR ROUGH TERRAIN USE - ACCORDING TO STANDARD ISO 22915-13
kg
To Next Page
Loading...
