EasyManua.ls Logo

HANGCHA CPCD25-XW98E-RT2 - Page 78

HANGCHA CPCD25-XW98E-RT2
103 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
74
21.Lubrication system label
22. Danger labelNo entering mast label
Warning It is dangerous of your life. If the
body is crushed between the mast, instrument
frame and shield cab, it can be fatal. If the
part needs to be checked or repaired, the
inspection and repair should be carried out
after shutting down the engine. There should
not be person on the truck or others to
operate the truck to avoid accidents by
handling mast lever wrongly.
23. Danger label
The inner and outer mast, fork frame are all
lifting slip parts. The hands are not allowed to
reach in between the inner and outer masts.
If a part needs to be check or repaired, the
inspection and repair should be carried out
after shutting down the engine. There should
not be person on the truck or others to
operate the truck to avoid accidents by
handling mast lever wrongly.
Serial number printing position
Each truck has one unique chassis serial
number and the printing position is at the
front right of the chassis.
The print position
of truck body
serise number
24.Operational Instructions Label
DIFFERENTIAL LOCKER SWITCH OF
DRIVE AXLE
FWD/4WD EXCHANGE SWITCH
· FWD/4WD EXCHANGE SWITCH
Please keep choosing FWD during normal
operation; when output power
from single drive axle is not enough, please
choose 4WD.
·DIFFERENTIAL LOCKER SWITCH OF
DRIVE AXLEPlease keep it off during
normal operation, to avoid
damage of differential locker and turn over

Table of Contents

Related product manuals