4.14. PRINTER MODE
Option: Ansi, Ascii, or Text
Ansi mode: Use this mode when your printer is set as Ansi. In this case all the accented characters/symbols available in titrator will
be printed on your printer.
Ascii mode: Use this mode when your printer is set as Ascii. In this case only some of the accented characters/symbols available in
titrator will be printed on your printer.
Text mode: Use this mode when you don’t need to print the accented characters.
4.15. RESET TO DEFAULT SETTINGS
Note: This will also delete all the user - created methods and restore all manufacturer settings such as titrator configuration,
standard method parameters, etc.
To Next Page
Loading...
