5.5.13.1.4. SAMPLE CALCULATIONS BY WEIGHT
This calculation is used when the concentration of an analyte is determined by the weight of the sample. The results are based on the
initial sample weight (in grams).
The titrator will calculate the results based on the selected units.
The titrator will provide the results based on the titrant and sample units selected.
Titrant Units:
M (mol/L) moles/liter
N (eq/L) equivalents/liter
g/L grams/liter
mg/L milligrams/liter
Final Result Units:
ppt (g/kg) parts per thousand (grams/kilogram)
ppm (mg/kg) parts per million (milligrams/kilogram)
ppb (µg/kg) parts per billion (micrograms/kilogram)
% (g/100 g) percentage in weight (grams/100 grams)
mg/g milligrams/gram
mg/kg milligrams/kilogram
mol/kg moles/kilogram
mmol/g millimoles/gram
eq/kg equivalents/kilogram
meq/kg milliequivalents/kilogram
To Next Page
Loading...
